Maintenance
Showing 1 - 2 of 2 results
-
{"id":4747947049039,"title":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash","handle":"spring-kit-fits-all-futostash-models-or-add-a-spring-to-your-dynastash","description":"\u003cp\u003eWe have a custom made spring that fits perfectly into all Futo stash models also other popular brands like DynaStash. We'll send you a 3 pack of springs. Order these as an add-on item to keep your shipping cost down, we send them in a bubble mailer envelope so the shipping is just 1.00 when you add them onto your order. \u003c\/p\u003e\n\u003cp\u003eHow to install:\u003c\/p\u003e\n\u003cp\u003e1. If you have a spring in your stash already, remove it by just pulling it out. The springs are always just friction fit into the stash. This can be done with any long thin improvised device, such as a paper clip with a little hook on the end. \u003c\/p\u003e\n\u003cp\u003e2. Orient your spring with widest coil at the bottom. The bottom coil should be just slightly wider than the hole. \u003c\/p\u003e\n\u003cp\u003e3. Press the spring into the hole, this should require you to squish it a bit. If you need to adjust the bottom coil can easily be bent and stretched to fit, eg if the spring just falls into the hole, stretch the bottom coil a little wider. \u003c\/p\u003e\n\u003cp\u003e4. Once the spring is started in the hole, just press to the bottom of the hole with your vaporizer or one hitter - all the way to the bottom. The spring will hold itself in place at the bottom, while allowing all of the top coils to move freely.\u003c\/p\u003e\n\u003cp\u003e5. Test your spring by pushing down on your vaporizer \/ one hitter a few times, it should move up and down freely. This is usually a smooth process.\u003c\/p\u003e\n\u003cp\u003eAdvance Options:\u003c\/p\u003e\n\u003cp\u003e1. Increasing height - if you want the spring to pop your vaporizer \/ one hitter up higher, for example because you have a DynaVap M and and XL stash, or maybe you have a an XL G2 stash you want to keep different sizes of vaporizers in it - you can do them. Pull the spring out with your improvised spring puller, and holding the top and bottom stretch it out gently. You can add up to 1\/2\" onto the height. \u003c\/p\u003e\n\u003cp\u003e2. Decreasing height - this can be done carefully by clipping some of the coils off the bottom. Use plyers or wire cutters, it's light guage steel so it cut easily. Don't use scissors. After you clip the bottom coil, stretch it out wider so that it's wider than the hole. Springs can be decreased by up to 1\/4\". \u003c\/p\u003e\n\u003cp\u003eTroubleshooting:\u003c\/p\u003e\n\u003cp\u003eQ. When I pushed the spring into the hole, it got stuck. A. You probably had the bottom coil stretched too wide. Make a spring puller out of a paper clip, a dental pick, a twig, anything 4-5\" long that can snag the spring and pull it out. Try to fix the shape, make sure the bottom coil is just slightly wider than the hole and try again. Or try another spring.\u003c\/p\u003e\n\u003cp\u003eQ. Why is the shipping like $5-10 for this? A. We're in Canada, and Canada Post \/ USPS has some high minimums. But we can add a spring onto your order for 1.00, which is what we suggest. Like if you just buy a spring we're sending it to you for free basically, the envelope and time to go ship it is more than 2.00 etc.\u003c\/p\u003e\n\u003cp\u003eSprings pops up your vaporizer or one hitter with light tension, and keeps it pressed snuggly against the lid when closed.\u003c\/p\u003e\n\u003cp\u003eWe can provide them to fit various models which will have different hole sizes.\u003c\/p\u003e\n\u003cp\u003eSprings are 1\" tall and fit these stash models (please specify on checkout)\u003c\/p\u003e\n\u003cp\u003eFutoStash R\u003cbr\u003e\nFutoStash XL\u003cbr\u003e\nFutoStash S\u003cbr\u003e\nFutoStash SXL\u003cbr\u003e\nFutoStash G\u003cbr\u003e\nFutoStash X\u003cbr\u003e\nDynaStash\u003cbr\u003e\nDynaStash ER\u003cbr\u003e\nDynaStash XL\u003c\/p\u003e\n","published_at":"2020-07-27T09:46:53-05:00","created_at":"2020-07-27T09:46:53-05:00","vendor":"Futo Manufacturing","type":"","tags":["abv","case","dynastash","dynavap","dynavape","futo","FutoStash-Sprout","Glass-Hitter","levate","magnet","simrell","springs","stasher","vong"],"price":200,"price_min":200,"price_max":200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40915372245177,"title":"FutoStash R or G2","option1":"FutoStash R or G2","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - FutoStash R or G2","public_title":"FutoStash R or G2","options":["FutoStash R or G2"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372277945,"title":"FutoStash XL or XLG2","option1":"FutoStash XL or XLG2","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - FutoStash XL or XLG2","public_title":"FutoStash XL or XLG2","options":["FutoStash XL or XLG2"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372310713,"title":"FutoStash S or SXL","option1":"FutoStash S or SXL","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - FutoStash S or SXL","public_title":"FutoStash S or SXL","options":["FutoStash S or SXL"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372343481,"title":"FutoStash X","option1":"FutoStash X","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - FutoStash X","public_title":"FutoStash X","options":["FutoStash X"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372376249,"title":"FutoStash G","option1":"FutoStash G","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - FutoStash G","public_title":"FutoStash G","options":["FutoStash G"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372409017,"title":"Futo Sprouts","option1":"Futo Sprouts","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - Futo Sprouts","public_title":"Futo Sprouts","options":["Futo Sprouts"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372441785,"title":"DynaStash","option1":"DynaStash","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - DynaStash","public_title":"DynaStash","options":["DynaStash"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372474553,"title":"DynaStash XL","option1":"DynaStash XL","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - DynaStash XL","public_title":"DynaStash XL","options":["DynaStash XL"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null},{"id":40915372507321,"title":"DynaStash ER","option1":"DynaStash ER","option2":null,"option3":null,"sku":"ced_29732119314511","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash - DynaStash ER","public_title":"DynaStash ER","options":["DynaStash ER"],"price":200,"weight":50,"compare_at_price":null,"inventory_quantity":79,"inventory_management":"shopify","inventory_policy":"deny","barcode":null}],"images":["\/\/www.futo.ca\/cdn\/shop\/products\/il_fullxfull.2474883419_de35.jpg?v=1630945601"],"featured_image":"\/\/www.futo.ca\/cdn\/shop\/products\/il_fullxfull.2474883419_de35.jpg?v=1630945601","options":["Stash Model"],"media":[{"alt":"Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash","id":22512923574457,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/www.futo.ca\/cdn\/shop\/products\/il_fullxfull.2474883419_de35.jpg?v=1630945601"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/www.futo.ca\/cdn\/shop\/products\/il_fullxfull.2474883419_de35.jpg?v=1630945601","width":500}],"content":"\u003cp\u003eWe have a custom made spring that fits perfectly into all Futo stash models also other popular brands like DynaStash. We'll send you a 3 pack of springs. Order these as an add-on item to keep your shipping cost down, we send them in a bubble mailer envelope so the shipping is just 1.00 when you add them onto your order. \u003c\/p\u003e\n\u003cp\u003eHow to install:\u003c\/p\u003e\n\u003cp\u003e1. If you have a spring in your stash already, remove it by just pulling it out. The springs are always just friction fit into the stash. This can be done with any long thin improvised device, such as a paper clip with a little hook on the end. \u003c\/p\u003e\n\u003cp\u003e2. Orient your spring with widest coil at the bottom. The bottom coil should be just slightly wider than the hole. \u003c\/p\u003e\n\u003cp\u003e3. Press the spring into the hole, this should require you to squish it a bit. If you need to adjust the bottom coil can easily be bent and stretched to fit, eg if the spring just falls into the hole, stretch the bottom coil a little wider. \u003c\/p\u003e\n\u003cp\u003e4. Once the spring is started in the hole, just press to the bottom of the hole with your vaporizer or one hitter - all the way to the bottom. The spring will hold itself in place at the bottom, while allowing all of the top coils to move freely.\u003c\/p\u003e\n\u003cp\u003e5. Test your spring by pushing down on your vaporizer \/ one hitter a few times, it should move up and down freely. This is usually a smooth process.\u003c\/p\u003e\n\u003cp\u003eAdvance Options:\u003c\/p\u003e\n\u003cp\u003e1. Increasing height - if you want the spring to pop your vaporizer \/ one hitter up higher, for example because you have a DynaVap M and and XL stash, or maybe you have a an XL G2 stash you want to keep different sizes of vaporizers in it - you can do them. Pull the spring out with your improvised spring puller, and holding the top and bottom stretch it out gently. You can add up to 1\/2\" onto the height. \u003c\/p\u003e\n\u003cp\u003e2. Decreasing height - this can be done carefully by clipping some of the coils off the bottom. Use plyers or wire cutters, it's light guage steel so it cut easily. Don't use scissors. After you clip the bottom coil, stretch it out wider so that it's wider than the hole. Springs can be decreased by up to 1\/4\". \u003c\/p\u003e\n\u003cp\u003eTroubleshooting:\u003c\/p\u003e\n\u003cp\u003eQ. When I pushed the spring into the hole, it got stuck. A. You probably had the bottom coil stretched too wide. Make a spring puller out of a paper clip, a dental pick, a twig, anything 4-5\" long that can snag the spring and pull it out. Try to fix the shape, make sure the bottom coil is just slightly wider than the hole and try again. Or try another spring.\u003c\/p\u003e\n\u003cp\u003eQ. Why is the shipping like $5-10 for this? A. We're in Canada, and Canada Post \/ USPS has some high minimums. But we can add a spring onto your order for 1.00, which is what we suggest. Like if you just buy a spring we're sending it to you for free basically, the envelope and time to go ship it is more than 2.00 etc.\u003c\/p\u003e\n\u003cp\u003eSprings pops up your vaporizer or one hitter with light tension, and keeps it pressed snuggly against the lid when closed.\u003c\/p\u003e\n\u003cp\u003eWe can provide them to fit various models which will have different hole sizes.\u003c\/p\u003e\n\u003cp\u003eSprings are 1\" tall and fit these stash models (please specify on checkout)\u003c\/p\u003e\n\u003cp\u003eFutoStash R\u003cbr\u003e\nFutoStash XL\u003cbr\u003e\nFutoStash S\u003cbr\u003e\nFutoStash SXL\u003cbr\u003e\nFutoStash G\u003cbr\u003e\nFutoStash X\u003cbr\u003e\nDynaStash\u003cbr\u003e\nDynaStash ER\u003cbr\u003e\nDynaStash XL\u003c\/p\u003e\n"}
$2.00
We have a custom made spring that fits perfectly into all Futo stash models also other popular brands like DynaStash. We'll send you a 3 pack of springs. Order these as an add-on item to keep your shipping cost down, we send them in a bubble mailer envelope so the shipping is just 1.00 when you add them onto your order. How to install: 1. If you have a spring in your stash already, remove it by just pulling it out. The springs are always just friction fit into the stash. This can be done with any long thin improvised device, such as a paper clip with a little hook on the end. 2. Orient your spring with widest coil at the bottom. The bottom coil should be just slightly wider than the hole. 3. Press the spring into the hole, this should require you to squish it a bit....
We have a custom made spring that fits perfectly into all Futo stash models also other popular brands like DynaStash....
-
{"id":6948457808057,"title":"Maintenance Kit - Spring, Clean, and Protect your Stash","handle":"maintenance-kit-spring-clean-and-protect-your-stash","description":"\u003cp\u003eThis kit includes a large tin of wax made of walnut oil and locally harvested beeswax, 5 adjustable springs, and 3 quality pipe cleaners.\u003c\/p\u003e\n\u003cp\u003eThe wax can be used to maintain any and all of your wood products, the springs can be added to any stash designed for Dynavap for ease of access and to reduce rattling, and the pipe cleaners are amazing for cleaning out your condenser or any other hard-to-reach spots!\u003c\/p\u003e\n\u003cp\u003eSpring Instructions:\u003c\/p\u003e\n\u003cp\u003e1. If you have a spring in your stash already, remove it by just pulling it out. The springs are always just friction fit into the stash. This can be done with any long thin improvised device, such as a paper clip with a little hook on the end.\u003c\/p\u003e\n\u003cp\u003e2. Orient your spring with widest coil at the bottom. The bottom coil should be just slightly wider than the hole.\u003c\/p\u003e\n\u003cp\u003e3. Press the spring into the hole, this should require you to squish it a bit. If you need to adjust the bottom coil can easily be bent and stretched to fit, eg if the spring just falls into the hole, stretch the bottom coil a little wider.\u003c\/p\u003e\n\u003cp\u003e4. Once the spring is started in the hole, just press to the bottom of the hole with your vaporizer or one hitter - all the way to the bottom. The spring will hold itself in place at the bottom, while allowing all of the top coils to move freely.\u003c\/p\u003e\n\u003cp\u003e5. Test your spring by pushing down on your vaporizer \/ one hitter a few times, it should move up and down freely. This is usually a smooth process.\u003c\/p\u003e\n\u003cp\u003eAdvance Options:\u003c\/p\u003e\n\u003cp\u003e1. Increasing height - if you want the spring to pop your vaporizer \/ one hitter up higher, for example because you have a DynaVap M and and XL stash, or maybe you have a an XL G2 stash you want to keep different sizes of vaporizers in it - you can do them. Pull the spring out with your improvised spring puller, and holding the top and bottom stretch it out gently. You can add up to 1\/2\" onto the height.\u003c\/p\u003e\n\u003cp\u003e2. Decreasing height - this can be done carefully by clipping some of the coils off the bottom. Use plyers or wire cutters, it's light guage steel so it cuts easily. Don't use scissors. After you clip the bottom coil, stretch it out wider so that it's wider than the hole. Springs can be decreased by up to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eTroubleshooting:\u003c\/p\u003e\n\u003cp\u003eQ. When I pushed the spring into the hole, it got stuck. A. You probably had the bottom coil stretched too wide. Make a spring puller out of a paper clip, a dental pick, a twig, anything 4-5\" long that can snag the spring and pull it out. Try to fix the shape, make sure the bottom coil is just slightly wider than the hole and try again. Or try another spring.\u003c\/p\u003e\n\u003cp\u003eQ. Why is the shipping like $5-10 for this? A. We're in Canada, and Canada Post \/ USPS has some high minimums. But we can add a spring onto your order for 1.00, which is what we suggest. Like if you just buy a spring we're sending it to you for free basically, the envelope and time to go ship it is more than 2.00 etc.\u003c\/p\u003e\n\u003cp\u003eSprings pops up your vaporizer or one hitter with light tension, and keeps it pressed snuggly against the lid when closed.\u003c\/p\u003e\n\u003cp\u003eWe can provide them to fit various models which will have different hole sizes.\u003c\/p\u003e\n\u003cp\u003eSprings are 1\" tall and fit these stash models (please specify on checkout)\u003c\/p\u003e\n\u003cp\u003eFutoStash R\u003cbr\u003e FutoStash XL\u003cbr\u003e FutoStash S\u003cbr\u003e FutoStash SXL\u003cbr\u003e FutoStash G\u003cbr\u003e FutoStash X\u003cbr\u003e DynaStash\u003cbr\u003e DynaStash ER\u003cbr\u003e DynaStash XL\u003c\/p\u003e","published_at":"2021-09-06T11:48:10-05:00","created_at":"2021-09-06T11:41:42-05:00","vendor":"Futo Manufacturing","type":"","tags":["abv","case","dynastash","dynavap","dynavape","futo","FutoStash-Sprout","Glass-Hitter","levate","magnet","simrell","springs","stasher","vong"],"price":800,"price_min":800,"price_max":800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40915448004793,"title":"FutoStash R or G2","option1":"FutoStash R or G2","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - FutoStash R or G2","public_title":"FutoStash R or G2","options":["FutoStash R or G2"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":-22,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448037561,"title":"FutoStash XL or XLG2","option1":"FutoStash XL or XLG2","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - FutoStash XL or XLG2","public_title":"FutoStash XL or XLG2","options":["FutoStash XL or XLG2"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":8,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448070329,"title":"FutoStash S or SXL","option1":"FutoStash S or SXL","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - FutoStash S or SXL","public_title":"FutoStash S or SXL","options":["FutoStash S or SXL"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":8,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448103097,"title":"FutoStash X","option1":"FutoStash X","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - FutoStash X","public_title":"FutoStash X","options":["FutoStash X"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":12,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448135865,"title":"FutoStash G","option1":"FutoStash G","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - FutoStash G","public_title":"FutoStash G","options":["FutoStash G"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":12,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448168633,"title":"Futo Sprouts","option1":"Futo Sprouts","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - Futo Sprouts","public_title":"Futo Sprouts","options":["Futo Sprouts"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448201401,"title":"DynaStash","option1":"DynaStash","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - DynaStash","public_title":"DynaStash","options":["DynaStash"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":9,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448234169,"title":"DynaStash XL","option1":"DynaStash XL","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - DynaStash XL","public_title":"DynaStash XL","options":["DynaStash XL"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":11,"inventory_management":null,"inventory_policy":"deny","barcode":null},{"id":40915448266937,"title":"DynaStash ER","option1":"DynaStash ER","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Maintenance Kit - Spring, Clean, and Protect your Stash - DynaStash ER","public_title":"DynaStash ER","options":["DynaStash ER"],"price":800,"weight":50,"compare_at_price":null,"inventory_quantity":12,"inventory_management":null,"inventory_policy":"deny","barcode":null}],"images":["\/\/www.futo.ca\/cdn\/shop\/products\/IMG_8669.jpg?v=1630946567","\/\/www.futo.ca\/cdn\/shop\/products\/IMG_8670.jpg?v=1630946566","\/\/www.futo.ca\/cdn\/shop\/products\/futowax.jpg?v=1630946566"],"featured_image":"\/\/www.futo.ca\/cdn\/shop\/products\/IMG_8669.jpg?v=1630946567","options":["Stash Model"],"media":[{"alt":null,"id":22513142628537,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2448,"width":2448,"src":"\/\/www.futo.ca\/cdn\/shop\/products\/IMG_8669.jpg?v=1630946567"},"aspect_ratio":1.0,"height":2448,"media_type":"image","src":"\/\/www.futo.ca\/cdn\/shop\/products\/IMG_8669.jpg?v=1630946567","width":2448},{"alt":null,"id":22513142661305,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2448,"width":2448,"src":"\/\/www.futo.ca\/cdn\/shop\/products\/IMG_8670.jpg?v=1630946566"},"aspect_ratio":1.0,"height":2448,"media_type":"image","src":"\/\/www.futo.ca\/cdn\/shop\/products\/IMG_8670.jpg?v=1630946566","width":2448},{"alt":null,"id":22513142694073,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2448,"width":2448,"src":"\/\/www.futo.ca\/cdn\/shop\/products\/futowax.jpg?v=1630946566"},"aspect_ratio":1.0,"height":2448,"media_type":"image","src":"\/\/www.futo.ca\/cdn\/shop\/products\/futowax.jpg?v=1630946566","width":2448}],"content":"\u003cp\u003eThis kit includes a large tin of wax made of walnut oil and locally harvested beeswax, 5 adjustable springs, and 3 quality pipe cleaners.\u003c\/p\u003e\n\u003cp\u003eThe wax can be used to maintain any and all of your wood products, the springs can be added to any stash designed for Dynavap for ease of access and to reduce rattling, and the pipe cleaners are amazing for cleaning out your condenser or any other hard-to-reach spots!\u003c\/p\u003e\n\u003cp\u003eSpring Instructions:\u003c\/p\u003e\n\u003cp\u003e1. If you have a spring in your stash already, remove it by just pulling it out. The springs are always just friction fit into the stash. This can be done with any long thin improvised device, such as a paper clip with a little hook on the end.\u003c\/p\u003e\n\u003cp\u003e2. Orient your spring with widest coil at the bottom. The bottom coil should be just slightly wider than the hole.\u003c\/p\u003e\n\u003cp\u003e3. Press the spring into the hole, this should require you to squish it a bit. If you need to adjust the bottom coil can easily be bent and stretched to fit, eg if the spring just falls into the hole, stretch the bottom coil a little wider.\u003c\/p\u003e\n\u003cp\u003e4. Once the spring is started in the hole, just press to the bottom of the hole with your vaporizer or one hitter - all the way to the bottom. The spring will hold itself in place at the bottom, while allowing all of the top coils to move freely.\u003c\/p\u003e\n\u003cp\u003e5. Test your spring by pushing down on your vaporizer \/ one hitter a few times, it should move up and down freely. This is usually a smooth process.\u003c\/p\u003e\n\u003cp\u003eAdvance Options:\u003c\/p\u003e\n\u003cp\u003e1. Increasing height - if you want the spring to pop your vaporizer \/ one hitter up higher, for example because you have a DynaVap M and and XL stash, or maybe you have a an XL G2 stash you want to keep different sizes of vaporizers in it - you can do them. Pull the spring out with your improvised spring puller, and holding the top and bottom stretch it out gently. You can add up to 1\/2\" onto the height.\u003c\/p\u003e\n\u003cp\u003e2. Decreasing height - this can be done carefully by clipping some of the coils off the bottom. Use plyers or wire cutters, it's light guage steel so it cuts easily. Don't use scissors. After you clip the bottom coil, stretch it out wider so that it's wider than the hole. Springs can be decreased by up to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eTroubleshooting:\u003c\/p\u003e\n\u003cp\u003eQ. When I pushed the spring into the hole, it got stuck. A. You probably had the bottom coil stretched too wide. Make a spring puller out of a paper clip, a dental pick, a twig, anything 4-5\" long that can snag the spring and pull it out. Try to fix the shape, make sure the bottom coil is just slightly wider than the hole and try again. Or try another spring.\u003c\/p\u003e\n\u003cp\u003eQ. Why is the shipping like $5-10 for this? A. We're in Canada, and Canada Post \/ USPS has some high minimums. But we can add a spring onto your order for 1.00, which is what we suggest. Like if you just buy a spring we're sending it to you for free basically, the envelope and time to go ship it is more than 2.00 etc.\u003c\/p\u003e\n\u003cp\u003eSprings pops up your vaporizer or one hitter with light tension, and keeps it pressed snuggly against the lid when closed.\u003c\/p\u003e\n\u003cp\u003eWe can provide them to fit various models which will have different hole sizes.\u003c\/p\u003e\n\u003cp\u003eSprings are 1\" tall and fit these stash models (please specify on checkout)\u003c\/p\u003e\n\u003cp\u003eFutoStash R\u003cbr\u003e FutoStash XL\u003cbr\u003e FutoStash S\u003cbr\u003e FutoStash SXL\u003cbr\u003e FutoStash G\u003cbr\u003e FutoStash X\u003cbr\u003e DynaStash\u003cbr\u003e DynaStash ER\u003cbr\u003e DynaStash XL\u003c\/p\u003e"}
$8.00
This kit includes a large tin of wax made of walnut oil and locally harvested beeswax, 5 adjustable springs, and 3 quality pipe cleaners. The wax can be used to maintain any and all of your wood products, the springs can be added to any stash designed for Dynavap for ease of access and to reduce rattling, and the pipe cleaners are amazing for cleaning out your condenser or any other hard-to-reach spots! Spring Instructions: 1. If you have a spring in your stash already, remove it by just pulling it out. The springs are always just friction fit into the stash. This can be done with any long thin improvised device, such as a paper clip with a little hook on the end. 2. Orient your spring with widest coil at the bottom. The bottom coil should be just slightly wider than the hole. 3. Press the spring into the...
This kit includes a large tin of wax made of walnut oil and locally harvested beeswax, 5 adjustable springs, and 3...