
On Sale

-
{"id":8410722566463,"title":"Gabon Ebony #3982 - DynaVap Stem - XL Size","handle":"gabon-ebony-3982-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 3.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.52\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:32:50-05:00","created_at":"2023-05-30T10:32:50-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":7000,"price_min":7000,"price_max":7000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177271583039,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gabon Ebony #3982 - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":7000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3295.jpg?v=1685460788","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3296.jpg?v=1685460788","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3297.jpg?v=1685460788"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3295.jpg?v=1685460788","options":["Title"],"media":[{"alt":null,"id":33934719254847,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3295.jpg?v=1685460788"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3295.jpg?v=1685460788","width":3024},{"alt":null,"id":33934719287615,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3296.jpg?v=1685460788"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3296.jpg?v=1685460788","width":3024},{"alt":null,"id":33934719320383,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3297.jpg?v=1685460788"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3297.jpg?v=1685460788","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 3.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.52\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$70.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XLLength: 3.12"Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410721812799,"title":"Two Toned Kingwood #3981 - DynaVap Stem - XL Size","handle":"two-toned-kingwood-3981-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 3.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.52\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:31:57-05:00","created_at":"2023-05-30T10:31:57-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":7000,"price_min":7000,"price_max":7000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177269846335,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Two Toned Kingwood #3981 - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":7000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3292.jpg?v=1685460744","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3291.jpg?v=1685460744","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3293.jpg?v=1685460742"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3292.jpg?v=1685460744","options":["Title"],"media":[{"alt":null,"id":33934714569023,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3292.jpg?v=1685460744"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3292.jpg?v=1685460744","width":3024},{"alt":null,"id":33934714536255,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3291.jpg?v=1685460744"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3291.jpg?v=1685460744","width":3024},{"alt":null,"id":33934714601791,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3293.jpg?v=1685460742"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3293.jpg?v=1685460742","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 3.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.52\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$70.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XLLength: 3.12"Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410721517887,"title":"Gabon Ebony Wood #3980 - DynaVap Stem - XXL Size","handle":"gabon-ebony-wood-3980-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:31:17-05:00","created_at":"2023-05-30T10:31:17-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177269354815,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gabon Ebony Wood #3980 - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":8000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3287.jpg?v=1685460692","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3288.jpg?v=1685460692","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3289.jpg?v=1685460692"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3287.jpg?v=1685460692","options":["Title"],"media":[{"alt":null,"id":33934710079807,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3287.jpg?v=1685460692"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3287.jpg?v=1685460692","width":3024},{"alt":null,"id":33934710112575,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3288.jpg?v=1685460692"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3288.jpg?v=1685460692","width":3024},{"alt":null,"id":33934710145343,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3289.jpg?v=1685460692"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3289.jpg?v=1685460692","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$80.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410719420735,"title":"Wenge Wood - DynaVap Stem - XXL Size","handle":"wenge-wood-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:28:20-05:00","created_at":"2023-05-30T10:28:20-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177262309695,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wenge Wood - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3279.jpg?v=1685460510","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3280.jpg?v=1685460510","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3281.jpg?v=1685460510"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3279.jpg?v=1685460510","options":["Title"],"media":[{"alt":null,"id":33934693466431,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3279.jpg?v=1685460510"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3279.jpg?v=1685460510","width":3024},{"alt":null,"id":33934693499199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3280.jpg?v=1685460510"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3280.jpg?v=1685460510","width":3024},{"alt":null,"id":33934693531967,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3281.jpg?v=1685460510"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3281.jpg?v=1685460510","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410717716799,"title":"Verawood - DynaVap Stem - XXL Size - Aromatic","handle":"verawood-dynavap-stem-xxl-size-aromatic","description":"\u003cp\u003eNote the photos for this piece were taken right after it was made, after some exposure to light the wood actually turns green! \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:26:45-05:00","created_at":"2023-05-30T10:26:45-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177259131199,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Verawood - DynaVap Stem - XXL Size - Aromatic","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3276.jpg?v=1685460418","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3277.jpg?v=1685460418","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3278.jpg?v=1685460418"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3276.jpg?v=1685460418","options":["Title"],"media":[{"alt":null,"id":33934683832639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3276.jpg?v=1685460418"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3276.jpg?v=1685460418","width":3024},{"alt":null,"id":33934683865407,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3277.jpg?v=1685460418"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3277.jpg?v=1685460418","width":3024},{"alt":null,"id":33934683898175,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3278.jpg?v=1685460418"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3278.jpg?v=1685460418","width":3024}],"content":"\u003cp\u003eNote the photos for this piece were taken right after it was made, after some exposure to light the wood actually turns green! \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Note the photos for this piece were taken right after it was made, after some exposure to light the wood actually turns green! Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be...
Note the photos for this piece were taken right after it was made, after some exposure to light the wood...

-
{"id":8410716963135,"title":"Red Zebrawood - DynaVap Stem - XXL Size","handle":"red-zebrawood-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:25:31-05:00","created_at":"2023-05-30T10:25:31-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177256706367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Red Zebrawood - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3273.jpg?v=1685460343","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3274.jpg?v=1685460343","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3275.jpg?v=1685460343"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3273.jpg?v=1685460343","options":["Title"],"media":[{"alt":null,"id":33934677737791,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3273.jpg?v=1685460343"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3273.jpg?v=1685460343","width":3024},{"alt":null,"id":33934677770559,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3274.jpg?v=1685460343"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3274.jpg?v=1685460343","width":3024},{"alt":null,"id":33934677803327,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3275.jpg?v=1685460343"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3275.jpg?v=1685460343","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410715554111,"title":"Sapele Wood - DynaVap Stem - XXL Size","handle":"sapele-wood-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:24:50-05:00","created_at":"2023-05-30T10:24:50-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177254412607,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sapele Wood - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3270.jpg?v=1685460304","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3271.jpg?v=1685460304","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3272.jpg?v=1685460303"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3270.jpg?v=1685460304","options":["Title"],"media":[{"alt":null,"id":33934673379647,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3270.jpg?v=1685460304"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3270.jpg?v=1685460304","width":3024},{"alt":null,"id":33934673412415,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3271.jpg?v=1685460304"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3271.jpg?v=1685460304","width":3024},{"alt":null,"id":33934673445183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3272.jpg?v=1685460303"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3272.jpg?v=1685460303","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410714374463,"title":"Bocote Wood - DynaVap Stem - XXL Size","handle":"bocote-wood-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:24:19-05:00","created_at":"2023-05-30T10:24:19-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177252675903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bocote Wood - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3267.jpg?v=1685460273","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3268.jpg?v=1685460273","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3269.jpg?v=1685460273"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3267.jpg?v=1685460273","options":["Title"],"media":[{"alt":null,"id":33934670856511,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3267.jpg?v=1685460273"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3267.jpg?v=1685460273","width":3024},{"alt":null,"id":33934670889279,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3268.jpg?v=1685460273"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3268.jpg?v=1685460273","width":3024},{"alt":null,"id":33934670922047,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3269.jpg?v=1685460273"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3269.jpg?v=1685460273","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410712408383,"title":"Osage Orange Wood - DynaVap Stem - XXL Size","handle":"osage-orange-wood-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:23:39-05:00","created_at":"2023-05-30T10:23:39-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177248842047,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Osage Orange Wood - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3260.jpg?v=1685460231","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3261.jpg?v=1685460230","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3264.jpg?v=1685460249","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3265.jpg?v=1685460250","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3266.jpg?v=1685460249"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3260.jpg?v=1685460231","options":["Title"],"media":[{"alt":null,"id":33934667350335,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3260.jpg?v=1685460231"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3260.jpg?v=1685460231","width":3024},{"alt":null,"id":33934667383103,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3261.jpg?v=1685460230"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3261.jpg?v=1685460230","width":3024},{"alt":null,"id":33934668693823,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3264.jpg?v=1685460249"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3264.jpg?v=1685460249","width":3024},{"alt":null,"id":33934668726591,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3265.jpg?v=1685460250"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3265.jpg?v=1685460250","width":3024},{"alt":null,"id":33934668759359,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3266.jpg?v=1685460249"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3266.jpg?v=1685460249","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410711130431,"title":"Canarywood - DynaVap Stem - XXL Size","handle":"canarywood-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:23:09-05:00","created_at":"2023-05-30T10:23:09-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177247334719,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Canarywood - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3257.jpg?v=1685460200","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3258.jpg?v=1685460200","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3259.jpg?v=1685460200"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3257.jpg?v=1685460200","options":["Title"],"media":[{"alt":null,"id":33934664401215,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3257.jpg?v=1685460200"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3257.jpg?v=1685460200","width":3024},{"alt":null,"id":33934664532287,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3258.jpg?v=1685460200"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3258.jpg?v=1685460200","width":3024},{"alt":null,"id":33934664565055,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3259.jpg?v=1685460200"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3259.jpg?v=1685460200","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410707820863,"title":"Padauk Wood - DynaVap Stem - XXL Size","handle":"padauk-wood-dynavap-stem-xxl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:21:57-05:00","created_at":"2023-05-30T10:21:57-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177240092991,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Padauk Wood - DynaVap Stem - XXL Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3252.jpg?v=1685460139","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3253.jpg?v=1685460140","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3256.jpg?v=1685460152"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3252.jpg?v=1685460139","options":["Title"],"media":[{"alt":null,"id":33934656700735,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3252.jpg?v=1685460139"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3252.jpg?v=1685460139","width":3024},{"alt":null,"id":33934656766271,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3253.jpg?v=1685460140"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3253.jpg?v=1685460140","width":3024},{"alt":null,"id":33934658208063,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3256.jpg?v=1685460152"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3256.jpg?v=1685460152","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSize: XXL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLength: 4.12\"\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: 0.6\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions:\u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax.\u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok.\u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XXLLength: 4.12"Diameter: 0.6" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions:1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410702020927,"title":"Two Tone Gananadillo Wood - DynaVap Stem - XL Size","handle":"two-tone-gananadillo-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:20:01-05:00","created_at":"2023-05-30T10:20:01-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177229476159,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Two Tone Gananadillo Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3237.jpg?v=1685460015","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3238.jpg?v=1685460015","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3239.jpg?v=1685460015"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3237.jpg?v=1685460015","options":["Title"],"media":[{"alt":null,"id":33934642708799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3237.jpg?v=1685460015"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3237.jpg?v=1685460015","width":3024},{"alt":null,"id":33934642741567,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3238.jpg?v=1685460015"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3238.jpg?v=1685460015","width":3024},{"alt":null,"id":33934642774335,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3239.jpg?v=1685460015"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3239.jpg?v=1685460015","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$45.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410698711359,"title":"Bubinga Wood - DynaVap Stem - XL Size","handle":"bubinga-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:19:11-05:00","created_at":"2023-05-30T10:19:11-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177223315775,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bubinga Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4500,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3234.jpg?v=1685459963","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3235.jpg?v=1685459963","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3236.jpg?v=1685459963"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3234.jpg?v=1685459963","options":["Title"],"media":[{"alt":null,"id":33934636646719,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3234.jpg?v=1685459963"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3234.jpg?v=1685459963","width":3024},{"alt":null,"id":33934636679487,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3235.jpg?v=1685459963"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3235.jpg?v=1685459963","width":3024},{"alt":null,"id":33934636712255,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3236.jpg?v=1685459963"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3236.jpg?v=1685459963","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$45.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410696876351,"title":"Curly Walnut Wood - DynaVap Stem - XL Size","handle":"curly-walnut-wood-dynavap-stem-xl-size-1","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:18:39-05:00","created_at":"2023-05-30T10:18:39-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177221579071,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Curly Walnut Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4500,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3231.jpg?v=1685459931","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3232.jpg?v=1685459931","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3233.jpg?v=1685459931"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3231.jpg?v=1685459931","options":["Title"],"media":[{"alt":null,"id":33934632255807,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3231.jpg?v=1685459931"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3231.jpg?v=1685459931","width":3024},{"alt":null,"id":33934632288575,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3232.jpg?v=1685459931"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3232.jpg?v=1685459931","width":3024},{"alt":null,"id":33934632321343,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3233.jpg?v=1685459931"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3233.jpg?v=1685459931","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$45.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410695696703,"title":"Padauk Wood - DynaVap Stem - XL Size","handle":"padauk-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:18:13-05:00","created_at":"2023-05-30T10:18:13-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177218302271,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Padauk Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3228.jpg?v=1685459904","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3229.jpg?v=1685459904","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3230.jpg?v=1685459904"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3228.jpg?v=1685459904","options":["Title"],"media":[{"alt":null,"id":33934628815167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3228.jpg?v=1685459904"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3228.jpg?v=1685459904","width":3024},{"alt":null,"id":33934628847935,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3229.jpg?v=1685459904"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3229.jpg?v=1685459904","width":3024},{"alt":null,"id":33934628880703,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3230.jpg?v=1685459904"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3230.jpg?v=1685459904","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410694451519,"title":"Angelim Pedra Wood - DynaVap Stem - XL Size","handle":"angelim-pedra-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:17:45-05:00","created_at":"2023-05-30T10:17:45-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177215418687,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Angelim Pedra Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3225.jpg?v=1685459879","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3226.jpg?v=1685459879","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3227.jpg?v=1685459878"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3225.jpg?v=1685459879","options":["Title"],"media":[{"alt":null,"id":33934626849087,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3225.jpg?v=1685459879"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3225.jpg?v=1685459879","width":3024},{"alt":null,"id":33934626881855,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3226.jpg?v=1685459879"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3226.jpg?v=1685459879","width":3024},{"alt":null,"id":33934626914623,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3227.jpg?v=1685459878"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3227.jpg?v=1685459878","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410691141951,"title":"Wenge Wood - DynaVap Stem - XL Size","handle":"wenge-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:16:33-05:00","created_at":"2023-05-30T10:16:33-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177210241343,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wenge Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3222.jpg?v=1685459806","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3223.jpg?v=1685459806","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3224.jpg?v=1685459807"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3222.jpg?v=1685459806","options":["Title"],"media":[{"alt":null,"id":33934618689855,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3222.jpg?v=1685459806"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3222.jpg?v=1685459806","width":3024},{"alt":null,"id":33934618722623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3223.jpg?v=1685459806"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3223.jpg?v=1685459806","width":3024},{"alt":null,"id":33934618755391,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3224.jpg?v=1685459807"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3224.jpg?v=1685459807","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410689405247,"title":"Osage Orange Wood - DynaVap Stem - XL Size","handle":"osage-orange-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:15:55-05:00","created_at":"2023-05-30T10:15:55-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177208537407,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Osage Orange Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3220.jpg?v=1685459769","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3221.jpg?v=1685459769"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3220.jpg?v=1685459769","options":["Title"],"media":[{"alt":null,"id":33934614659391,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3220.jpg?v=1685459769"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3220.jpg?v=1685459769","width":3024},{"alt":null,"id":33934614692159,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3221.jpg?v=1685459769"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3221.jpg?v=1685459769","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410686390591,"title":"Curly Walnut Wood - DynaVap Stem - XL Size","handle":"curly-walnut-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:14:44-05:00","created_at":"2023-05-30T10:14:44-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177205391679,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Curly Walnut Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4500,"weight":100,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3218.jpg?v=1685459711","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3219.jpg?v=1685459711"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3218.jpg?v=1685459711","options":["Title"],"media":[{"alt":null,"id":33934608761151,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3218.jpg?v=1685459711"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3218.jpg?v=1685459711","width":3024},{"alt":null,"id":33934608793919,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3219.jpg?v=1685459711"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3219.jpg?v=1685459711","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$45.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410681147711,"title":"Bocote Wood - DynaVap Stem - XL Size","handle":"bocote-wood-dynavap-stem-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:12:35-05:00","created_at":"2023-05-30T10:12:35-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177198608703,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bocote Wood - DynaVap Stem - XL Size","public_title":null,"options":["Default Title"],"price":4500,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3248.jpg?v=1685459575","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3249.jpg?v=1685459575","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3250.jpg?v=1685459574"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3248.jpg?v=1685459575","options":["Title"],"media":[{"alt":null,"id":33934597620031,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3248.jpg?v=1685459575"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3248.jpg?v=1685459575","width":3024},{"alt":null,"id":33934597652799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3249.jpg?v=1685459575"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3249.jpg?v=1685459575","width":3024},{"alt":null,"id":33934597685567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3250.jpg?v=1685459574"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3250.jpg?v=1685459574","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$45.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410674528575,"title":"Swirly Ziricote Wood - DynaVap Stem - Regular Size","handle":"swirly-ziricote-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:10:06-05:00","created_at":"2023-05-30T10:10:06-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5500,"price_min":5500,"price_max":5500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177190318399,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Swirly Ziricote Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":5500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3241.jpg?v=1685459420","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3242.jpg?v=1685459420","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3243.jpg?v=1685459420"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3241.jpg?v=1685459420","options":["Title"],"media":[{"alt":null,"id":33934583365951,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3241.jpg?v=1685459420"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3241.jpg?v=1685459420","width":3024},{"alt":null,"id":33934583398719,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3242.jpg?v=1685459420"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3242.jpg?v=1685459420","width":3024},{"alt":null,"id":33934583431487,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3243.jpg?v=1685459420"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3243.jpg?v=1685459420","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$55.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410670367039,"title":"Osage Orange Wood - DynaVap Stem - Regular Size","handle":"osage-orange-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T10:08:29-05:00","created_at":"2023-05-30T10:08:30-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177184649535,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Osage Orange Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3214.jpg?v=1685459323","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3215.jpg?v=1685459323","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3216.jpg?v=1685459323"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3214.jpg?v=1685459323","options":["Title"],"media":[{"alt":null,"id":33934575141183,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3214.jpg?v=1685459323"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3214.jpg?v=1685459323","width":3024},{"alt":null,"id":33934575173951,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3215.jpg?v=1685459323"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3215.jpg?v=1685459323","width":3024},{"alt":null,"id":33934575206719,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3216.jpg?v=1685459323"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3216.jpg?v=1685459323","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410643333439,"title":"Curly Tigerwood - DynaVap Stem - Regular Size","handle":"curly-tigerwood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:58:22-05:00","created_at":"2023-05-30T09:58:22-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177139691839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Curly Tigerwood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3208.jpg?v=1685458712","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3209.jpg?v=1685458712","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3210.jpg?v=1685458712"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3208.jpg?v=1685458712","options":["Title"],"media":[{"alt":null,"id":33934514323775,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3208.jpg?v=1685458712"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3208.jpg?v=1685458712","width":3024},{"alt":null,"id":33934514356543,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3209.jpg?v=1685458712"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3209.jpg?v=1685458712","width":3024},{"alt":null,"id":33934514389311,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3210.jpg?v=1685458712"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3210.jpg?v=1685458712","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410641760575,"title":"Zebrawood - DynaVap Stem - Regular Size","handle":"zebrawood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:57:52-05:00","created_at":"2023-05-30T09:57:52-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177137004863,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Zebrawood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3205.jpg?v=1685458683","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3206.jpg?v=1685458683","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3207.jpg?v=1685458683"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3205.jpg?v=1685458683","options":["Title"],"media":[{"alt":null,"id":33934510817599,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3205.jpg?v=1685458683"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3205.jpg?v=1685458683","width":3024},{"alt":null,"id":33934510850367,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3206.jpg?v=1685458683"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3206.jpg?v=1685458683","width":3024},{"alt":null,"id":33934510883135,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3207.jpg?v=1685458683"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3207.jpg?v=1685458683","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410639728959,"title":"Verawood - DynaVap Stem - Regular Size - Aromatic","handle":"verawood-dynavap-stem-regular-size-aromatic","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:57:14-05:00","created_at":"2023-05-30T09:57:14-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177130320191,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Verawood - DynaVap Stem - Regular Size - Aromatic","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3202.jpg?v=1685458647","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3203.jpg?v=1685458647","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3204.jpg?v=1685458647"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3202.jpg?v=1685458647","options":["Title"],"media":[{"alt":null,"id":33934508818751,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3202.jpg?v=1685458647"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3202.jpg?v=1685458647","width":3024},{"alt":null,"id":33934508851519,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3203.jpg?v=1685458647"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3203.jpg?v=1685458647","width":3024},{"alt":null,"id":33934508884287,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3204.jpg?v=1685458647"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3204.jpg?v=1685458647","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410630947135,"title":"Red Palm Wood - DynaVap Stem - Regular Size","handle":"red-palm-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:54:33-05:00","created_at":"2023-05-30T09:54:33-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177119179071,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Red Palm Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3196.jpg?v=1685458483","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3197.jpg?v=1685458483","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3198.jpg?v=1685458483"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3196.jpg?v=1685458483","options":["Title"],"media":[{"alt":null,"id":33934489682239,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3196.jpg?v=1685458483"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3196.jpg?v=1685458483","width":3024},{"alt":null,"id":33934489715007,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3197.jpg?v=1685458483"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3197.jpg?v=1685458483","width":3024},{"alt":null,"id":33934489747775,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3198.jpg?v=1685458483"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3198.jpg?v=1685458483","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410628587839,"title":"Tigerwood - DynaVap Stem - Regular Size","handle":"tigerwood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:53:50-05:00","created_at":"2023-05-30T09:53:50-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177116688703,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tigerwood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3244.jpg?v=1685459497","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3194.jpg?v=1685459497","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3193.jpg?v=1685459497","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3195.jpg?v=1685459497","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3245.jpg?v=1685459489","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3246.jpg?v=1685459490"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3244.jpg?v=1685459497","options":["Title"],"media":[{"alt":null,"id":33934589788479,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3244.jpg?v=1685459497"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3244.jpg?v=1685459497","width":3024},{"alt":null,"id":33934483882303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3194.jpg?v=1685459497"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3194.jpg?v=1685459497","width":3024},{"alt":null,"id":33934483849535,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3193.jpg?v=1685459497"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3193.jpg?v=1685459497","width":3024},{"alt":null,"id":33934483915071,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3195.jpg?v=1685459497"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3195.jpg?v=1685459497","width":3024},{"alt":null,"id":33934589821247,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3245.jpg?v=1685459489"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3245.jpg?v=1685459489","width":3024},{"alt":null,"id":33934589854015,"position":6,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3246.jpg?v=1685459490"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3246.jpg?v=1685459490","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410625900863,"title":"Ziricote Wood - DynaVap Stem - Regular Size","handle":"ziricote-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:53:01-05:00","created_at":"2023-05-30T09:53:01-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177114067263,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ziricote Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3191.jpg?v=1685458519","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3190.jpg?v=1685458519","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3192.jpg?v=1685458519","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3201.jpg?v=1685458516","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3211.jpg?v=1685459277","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3212.jpg?v=1685459277","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3213.jpg?v=1685459277"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3191.jpg?v=1685458519","options":["Title"],"media":[{"alt":null,"id":33934478704959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3191.jpg?v=1685458519"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3191.jpg?v=1685458519","width":3024},{"alt":null,"id":33934478672191,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3190.jpg?v=1685458519"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3190.jpg?v=1685458519","width":3024},{"alt":null,"id":33934478737727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3192.jpg?v=1685458519"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3192.jpg?v=1685458519","width":3024},{"alt":null,"id":33934494269759,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3201.jpg?v=1685458516"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3201.jpg?v=1685458516","width":3024},{"alt":null,"id":33934571143487,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3211.jpg?v=1685459277"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3211.jpg?v=1685459277","width":3024},{"alt":null,"id":33934571176255,"position":6,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3212.jpg?v=1685459277"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3212.jpg?v=1685459277","width":3024},{"alt":null,"id":33934571209023,"position":7,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3213.jpg?v=1685459277"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3213.jpg?v=1685459277","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410624196927,"title":"Purpleheart Wood - DynaVap Stem - Regular Size","handle":"purpleheart-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:52:24-05:00","created_at":"2023-05-30T09:52:24-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177111544127,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Purpleheart Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3187.jpg?v=1685458357","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3188.jpg?v=1685458357","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3189.jpg?v=1685458357"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3187.jpg?v=1685458357","options":["Title"],"media":[{"alt":null,"id":33934475526463,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3187.jpg?v=1685458357"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3187.jpg?v=1685458357","width":3024},{"alt":null,"id":33934475559231,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3188.jpg?v=1685458357"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3188.jpg?v=1685458357","width":3024},{"alt":null,"id":33934475591999,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3189.jpg?v=1685458357"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3189.jpg?v=1685458357","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410621575487,"title":"Black \u0026 White Ebony Wood - DynaVap Stem - Regular Size","handle":"black-white-ebony-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:51:28-05:00","created_at":"2023-05-30T09:51:28-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177106235711,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Black \u0026 White Ebony Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3184.jpg?v=1685458303","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3185.jpg?v=1685458303","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3186.jpg?v=1685458303"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3184.jpg?v=1685458303","options":["Title"],"media":[{"alt":null,"id":33934470218047,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3184.jpg?v=1685458303"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3184.jpg?v=1685458303","width":3024},{"alt":null,"id":33934470250815,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3185.jpg?v=1685458303"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3185.jpg?v=1685458303","width":3024},{"alt":null,"id":33934470283583,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3186.jpg?v=1685458303"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3186.jpg?v=1685458303","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410620133695,"title":"Angelim Pedra Wood - DynaVap Stem - Regular Size","handle":"angelim-pedra-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:50:53-05:00","created_at":"2023-05-30T09:50:53-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177103647039,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Angelim Pedra Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3181.jpg?v=1685458268","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3182.jpg?v=1685458268","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3183.jpg?v=1685458268"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3181.jpg?v=1685458268","options":["Title"],"media":[{"alt":null,"id":33934467531071,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3181.jpg?v=1685458268"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3181.jpg?v=1685458268","width":3024},{"alt":null,"id":33934467563839,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3182.jpg?v=1685458268"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3182.jpg?v=1685458268","width":3024},{"alt":null,"id":33934467596607,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3183.jpg?v=1685458268"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3183.jpg?v=1685458268","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410586677567,"title":"Granadillo Wood - DynaVap Stem - Regular Size","handle":"granadillo-wood-dynavap-stem-regular-size","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:39:56-05:00","created_at":"2023-05-30T09:39:56-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177049809215,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Granadillo Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3178.jpg?v=1685457613","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3179.jpg?v=1685457613","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3180.jpg?v=1685457613"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3178.jpg?v=1685457613","options":["Title"],"media":[{"alt":null,"id":33934391869759,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3178.jpg?v=1685457613"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3178.jpg?v=1685457613","width":3024},{"alt":null,"id":33934391902527,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3179.jpg?v=1685457613"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3179.jpg?v=1685457613","width":3024},{"alt":null,"id":33934391935295,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3180.jpg?v=1685457613"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3180.jpg?v=1685457613","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.52\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.52" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8410560004415,"title":"Imbuia Wood - DynaVap Stem - Regular Size","handle":"imbuia-regular-dynavap-stem","description":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-05-30T09:30:52-05:00","created_at":"2023-05-30T09:30:52-05:00","vendor":"Futo Manufacturing","type":"","tags":["dynavap stem","stem"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177004130623,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Imbuia Wood - DynaVap Stem - Regular Size","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3175.jpg?v=1685457384","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3176.jpg?v=1685457384","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3177.jpg?v=1685457383"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3175.jpg?v=1685457384","options":["Title"],"media":[{"alt":null,"id":33934362968383,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3175.jpg?v=1685457384"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3175.jpg?v=1685457384","width":3024},{"alt":null,"id":33934363001151,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3176.jpg?v=1685457384"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3176.jpg?v=1685457384","width":3024},{"alt":null,"id":33934363033919,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3177.jpg?v=1685457383"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_3177.jpg?v=1685457383","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section made from wood. \u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e*Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.\u003cbr\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new stem until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of any DynaVap vaporizer. Compatible with all DynaVap vaporizer Tips.All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.520" * vaporizer not included *Note this listing is for a stem made from the type of wood shown. Wood always has some natural variation in grain and color and will be very similar to but not exactly the same as the one in the photos.Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some...
Custom DynaVap stem or mid section made from wood. This is an upgrade piece to replace the main body of...

-
{"id":8360083489087,"title":"Custom Order - Futo Z Stem - Olivewood","handle":"custom-order-futo-z-stem-olivewood","description":"\u003cp\u003eUpgrade your DyanVap M with a Futo Z Stem\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Pairs with our FutoStash Z\u003cbr\u003e- Compatible with all DynaVap Tips and Regular Condensers\u003cbr\u003e- Fits in our FutoStash Z and FutoStash R\u003cbr\u003e- Dimensions 2.5\" x 0.5\" \u003cbr\u003e- Fits 2.5\" Condensers\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces the mid section \/ stem of your DynaVap vaporizer.\u003cbr\u003eThe Tip and the condenser can pressed in to fit and is held in place with o-rings.\u003c\/p\u003e\n\u003cp\u003e* Vaporizer is not included.\u003c\/p\u003e","published_at":"2023-05-05T00:09:21-05:00","created_at":"2023-05-05T00:09:21-05:00","vendor":"Futo Manufacturing","type":"","tags":[],"price":3000,"price_min":3000,"price_max":3000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45000022262079,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Custom Order - Futo Z Stem - Olivewood","public_title":null,"options":["Default Title"],"price":3000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_8954_0d11dda8-af27-4fbf-9e8e-579184d4a51e.jpg?v=1683263380","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_8929_313009c6-907d-43cc-b975-e9ef590e32d3.jpg?v=1683263381"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_8954_0d11dda8-af27-4fbf-9e8e-579184d4a51e.jpg?v=1683263380","options":["Title"],"media":[{"alt":null,"id":33711472771391,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_8954_0d11dda8-af27-4fbf-9e8e-579184d4a51e.jpg?v=1683263380"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_8954_0d11dda8-af27-4fbf-9e8e-579184d4a51e.jpg?v=1683263380","width":3024},{"alt":null,"id":33711472836927,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_8929_313009c6-907d-43cc-b975-e9ef590e32d3.jpg?v=1683263381"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/files\/IMG_8929_313009c6-907d-43cc-b975-e9ef590e32d3.jpg?v=1683263381","width":3024}],"content":"\u003cp\u003eUpgrade your DyanVap M with a Futo Z Stem\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Pairs with our FutoStash Z\u003cbr\u003e- Compatible with all DynaVap Tips and Regular Condensers\u003cbr\u003e- Fits in our FutoStash Z and FutoStash R\u003cbr\u003e- Dimensions 2.5\" x 0.5\" \u003cbr\u003e- Fits 2.5\" Condensers\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces the mid section \/ stem of your DynaVap vaporizer.\u003cbr\u003eThe Tip and the condenser can pressed in to fit and is held in place with o-rings.\u003c\/p\u003e\n\u003cp\u003e* Vaporizer is not included.\u003c\/p\u003e"}
$30.00
Upgrade your DyanVap M with a Futo Z Stem
- Pairs with our FutoStash Z- Compatible with all DynaVap Tips and Regular Condensers- Fits in our FutoStash Z and FutoStash R- Dimensions 2.5" x 0.5" - Fits 2.5" Condensers
Replaces the mid section / stem of your DynaVap vaporizer.The Tip and the condenser can pressed in to fit and is held in place with o-rings.
* Vaporizer is not included.
Upgrade your DyanVap M with a Futo Z Stem - Pairs with our FutoStash Z- Compatible with all DynaVap Tips...

-
{"id":8329376792895,"title":"Galaxy XL Stem - #3963 - DynaVap Upgrade","handle":"galaxy-xl-stem-3963-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-04-19T21:13:14-05:00","created_at":"2023-04-19T21:13:14-05:00","vendor":"Futo Manufacturing","type":"","tags":["04022023 Release","04192023 Release","04202023 Release","420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6500,"price_min":6500,"price_max":6500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44919257891135,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy XL Stem - #3963 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":6500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2320.jpg?v=1681956809","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2321.jpg?v=1681956809","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2322.jpg?v=1681956809","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2323.jpg?v=1681956808"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2320.jpg?v=1681956809","options":["Title"],"media":[{"alt":null,"id":33605386797375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2320.jpg?v=1681956809"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2320.jpg?v=1681956809","width":3024},{"alt":null,"id":33605386830143,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2321.jpg?v=1681956809"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2321.jpg?v=1681956809","width":3024},{"alt":null,"id":33605386862911,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2322.jpg?v=1681956809"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2322.jpg?v=1681956809","width":3024},{"alt":null,"id":33605386895679,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2323.jpg?v=1681956808"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2323.jpg?v=1681956808","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$65.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8329376006463,"title":"Galaxy XL Stem - #3962 - DynaVap Upgrade","handle":"galaxy-xl-stem-3962-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-04-19T21:12:45-05:00","created_at":"2023-04-19T21:12:45-05:00","vendor":"Futo Manufacturing","type":"","tags":["04022023 Release","04192023 Release","04202023 Release","420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6500,"price_min":6500,"price_max":6500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44919253336383,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy XL Stem - #3962 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":6500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2314.jpg?v=1681956779","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2315.jpg?v=1681956779","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2317.jpg?v=1681956779","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2318.jpg?v=1681956779"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2314.jpg?v=1681956779","options":["Title"],"media":[{"alt":null,"id":33605383487807,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2314.jpg?v=1681956779"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2314.jpg?v=1681956779","width":3024},{"alt":null,"id":33605383520575,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2315.jpg?v=1681956779"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2315.jpg?v=1681956779","width":3024},{"alt":null,"id":33605383553343,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2317.jpg?v=1681956779"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2317.jpg?v=1681956779","width":3024},{"alt":null,"id":33605383586111,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2318.jpg?v=1681956779"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2318.jpg?v=1681956779","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$65.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8329371255103,"title":"Galaxy Burl XXL Stem - #3957 - Stabilized Burl - DynaVap Upgrade","handle":"galaxy-burl-xxl-stem-3957-stabilized-burl-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003e* XXL Stems are 1.0\" longer than XL and slightly wider. \u003cbr\u003e* For storage they will fit inside our FutoStash XXL\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XXL\u003cbr\u003e Length: 4.125\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e","published_at":"2023-04-19T21:08:59-05:00","created_at":"2023-04-19T21:08:59-05:00","vendor":"Futo Manufacturing","type":"","tags":["04192023 Release","04202023 Release","420_30_PERCENT_OFF","420_GROUP_1","dynavap","dynavap stem","simrell","vapcap"],"price":8500,"price_min":8500,"price_max":8500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44919232233791,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy Burl XXL Stem - #3957 - Stabilized Burl - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":8500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2294.jpg?v=1681956553","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2295.jpg?v=1681956553","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2296.jpg?v=1681956553","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2297.jpg?v=1681956553"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2294.jpg?v=1681956553","options":["Title"],"media":[{"alt":null,"id":33605362614591,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2294.jpg?v=1681956553"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2294.jpg?v=1681956553","width":3024},{"alt":null,"id":33605362647359,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2295.jpg?v=1681956553"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2295.jpg?v=1681956553","width":3024},{"alt":null,"id":33605362680127,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2296.jpg?v=1681956553"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2296.jpg?v=1681956553","width":3024},{"alt":null,"id":33605362712895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2297.jpg?v=1681956553"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2297.jpg?v=1681956553","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003e* XXL Stems are 1.0\" longer than XL and slightly wider. \u003cbr\u003e* For storage they will fit inside our FutoStash XXL\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XXL\u003cbr\u003e Length: 4.125\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e"}
$85.00
Custom DynaVap stem or mid section.
* XXL Stems are 1.0" longer than XL and slightly wider. * For storage they will fit inside our FutoStash XXL
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XXL Length: 4.125" Diameter: 0.600"
* vaporizer not included
Custom DynaVap stem or mid section. * XXL Stems are 1.0" longer than XL and slightly wider. * For storage they...

-
{"id":8329370272063,"title":"Galaxy Burl XXL Stem - #3955 - Stabilized Burl - DynaVap Upgrade","handle":"galaxy-burl-xxl-stem-3955-stabilized-burl-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003e* XXL Stems are 1.0\" longer than XL and slightly wider. \u003cbr\u003e* For storage they will fit inside our FutoStash XXL\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XXL\u003cbr\u003e Length: 4.125\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e","published_at":"2023-04-19T21:07:54-05:00","created_at":"2023-04-19T21:07:54-05:00","vendor":"Futo Manufacturing","type":"","tags":["04192023 Release","04202023 Release","420_30_PERCENT_OFF","420_GROUP_1","dynavap","dynavap stem","simrell","vapcap"],"price":8500,"price_min":8500,"price_max":8500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44919229350207,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy Burl XXL Stem - #3955 - Stabilized Burl - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":8500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2281.jpg?v=1681956488","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2282.jpg?v=1681956488","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2283.jpg?v=1681956489","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2284.jpg?v=1681956488"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2281.jpg?v=1681956488","options":["Title"],"media":[{"alt":null,"id":33605357797695,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2281.jpg?v=1681956488"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2281.jpg?v=1681956488","width":3024},{"alt":null,"id":33605357830463,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2282.jpg?v=1681956488"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2282.jpg?v=1681956488","width":3024},{"alt":null,"id":33605357863231,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2283.jpg?v=1681956489"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2283.jpg?v=1681956489","width":3024},{"alt":null,"id":33605357895999,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2284.jpg?v=1681956488"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_2284.jpg?v=1681956488","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003e* XXL Stems are 1.0\" longer than XL and slightly wider. \u003cbr\u003e* For storage they will fit inside our FutoStash XXL\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XXL\u003cbr\u003e Length: 4.125\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e"}
$85.00
Custom DynaVap stem or mid section.
* XXL Stems are 1.0" longer than XL and slightly wider. * For storage they will fit inside our FutoStash XXL
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XXL Length: 4.125" Diameter: 0.600"
* vaporizer not included
Custom DynaVap stem or mid section. * XXL Stems are 1.0" longer than XL and slightly wider. * For storage they...

-
{"id":8284535030079,"title":"Amboyna Burl XL Stem - #3935 - DynaVap Upgrade","handle":"amboyna-burl-xl-stem-3935-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-04-02T14:49:42-05:00","created_at":"2023-04-02T14:49:42-05:00","vendor":"Futo Manufacturing","type":"","tags":["04022023 Release","420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44802439151935,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Amboyna Burl XL Stem - #3935 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1984.jpg?v=1680464996","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1985.jpg?v=1680464996","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1986.jpg?v=1680464996","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1987.jpg?v=1680464997"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1984.jpg?v=1680464996","options":["Title"],"media":[{"alt":null,"id":33366712811839,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1984.jpg?v=1680464996"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1984.jpg?v=1680464996","width":3024},{"alt":null,"id":33366712844607,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1985.jpg?v=1680464996"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1985.jpg?v=1680464996","width":3024},{"alt":null,"id":33366712877375,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1986.jpg?v=1680464996"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1986.jpg?v=1680464996","width":3024},{"alt":null,"id":33366712910143,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1987.jpg?v=1680464997"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1987.jpg?v=1680464997","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8284532867391,"title":"Galaxy XL Stem - #3931 - DynaVap Upgrade","handle":"galaxy-xl-stem-3931-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2023-04-02T14:47:06-05:00","created_at":"2023-04-02T14:47:06-05:00","vendor":"Futo Manufacturing","type":"","tags":["04022023 Release","420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44802431549759,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy XL Stem - #3931 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1961.jpg?v=1680464840","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1962.jpg?v=1680464840","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1963.jpg?v=1680464840","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1964.jpg?v=1680464840","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1965.jpg?v=1680464840"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1961.jpg?v=1680464840","options":["Title"],"media":[{"alt":null,"id":33366698983743,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1961.jpg?v=1680464840"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1961.jpg?v=1680464840","width":3024},{"alt":null,"id":33366699016511,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1962.jpg?v=1680464840"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1962.jpg?v=1680464840","width":3024},{"alt":null,"id":33366699049279,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1963.jpg?v=1680464840"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1963.jpg?v=1680464840","width":3024},{"alt":null,"id":33366699082047,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1964.jpg?v=1680464840"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1964.jpg?v=1680464840","width":3024},{"alt":null,"id":33366699114815,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1965.jpg?v=1680464840"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_1965.jpg?v=1680464840","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8052269777215,"title":"Plateau Briar Stem - #3867 - DynaVap Stem","handle":"plateau-briar-stem-3867-dynavap-stem","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular \/ Wide (*May require a custom stash, ask for details)\u003cbr\u003e Length: 2.5-3.0\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-24T23:44:09-06:00","created_at":"2022-11-24T23:44:09-06:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44063437881663,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Plateau Briar Stem - #3867 - DynaVap Stem","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9628.jpg?v=1669355067","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9629.jpg?v=1669355066","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9630.jpg?v=1669355067","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9631.jpg?v=1669355066","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9632.jpg?v=1669355066"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9628.jpg?v=1669355067","options":["Title"],"media":[{"alt":null,"id":32281402212671,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9628.jpg?v=1669355067"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9628.jpg?v=1669355067","width":3024},{"alt":null,"id":32281402245439,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9629.jpg?v=1669355066"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9629.jpg?v=1669355066","width":3024},{"alt":null,"id":32281402278207,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9630.jpg?v=1669355067"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9630.jpg?v=1669355067","width":3024},{"alt":null,"id":32281402310975,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9631.jpg?v=1669355066"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9631.jpg?v=1669355066","width":3024},{"alt":null,"id":32281402343743,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9632.jpg?v=1669355066"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9632.jpg?v=1669355066","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular \/ Wide (*May require a custom stash, ask for details)\u003cbr\u003e Length: 2.5-3.0\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: Regular / Wide (*May require a custom stash, ask for details) Length: 2.5-3.0" Diameter: 0.600" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8052267909439,"title":"Plateau Briar Stem - #3864 - DynaVap Stem","handle":"plateau-briar-stem-3864-dynavap-stem","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular \/ Wide (*May require a custom stash, ask for details)\u003cbr\u003e Length: 2.5-3.0\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-24T23:42:38-06:00","created_at":"2022-11-24T23:42:38-06:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44063437357375,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Plateau Briar Stem - #3864 - DynaVap Stem","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9610.jpg?v=1669354976","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9611.jpg?v=1669354976","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9612.jpg?v=1669354976","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9613.jpg?v=1669354976","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9614.jpg?v=1669354975"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9610.jpg?v=1669354976","options":["Title"],"media":[{"alt":null,"id":32281399329087,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9610.jpg?v=1669354976"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9610.jpg?v=1669354976","width":3024},{"alt":null,"id":32281399361855,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9611.jpg?v=1669354976"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9611.jpg?v=1669354976","width":3024},{"alt":null,"id":32281399394623,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9612.jpg?v=1669354976"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9612.jpg?v=1669354976","width":3024},{"alt":null,"id":32281399427391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9613.jpg?v=1669354976"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9613.jpg?v=1669354976","width":3024},{"alt":null,"id":32281399460159,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9614.jpg?v=1669354975"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9614.jpg?v=1669354975","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular \/ Wide (*May require a custom stash, ask for details)\u003cbr\u003e Length: 2.5-3.0\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: Regular / Wide (*May require a custom stash, ask for details) Length: 2.5-3.0" Diameter: 0.600" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8047626158399,"title":"Bloodwood XL+ Stem - #3837 - DynaVap Upgrade","handle":"bloodwood-xl-stem-3837-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e*Note this stem is larger than our XL and does not fit inside the FutoStash XL. Currently the compatible stash for this is our FutoStash Anvil XL.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL+ \u003cbr\u003e Length: 3.25\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-22T23:25:18-06:00","created_at":"2022-11-22T23:25:18-06:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44056234426687,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bloodwood XL+ Stem - #3837 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9348.jpg?v=1669181138","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9349.jpg?v=1669181137","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9350.jpg?v=1669181138","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9351.jpg?v=1669181138","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9353.jpg?v=1669181138"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9348.jpg?v=1669181138","options":["Title"],"media":[{"alt":null,"id":32270250344767,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9348.jpg?v=1669181138"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9348.jpg?v=1669181138","width":3024},{"alt":null,"id":32270250377535,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9349.jpg?v=1669181137"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9349.jpg?v=1669181137","width":3024},{"alt":null,"id":32270250410303,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9350.jpg?v=1669181138"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9350.jpg?v=1669181138","width":3024},{"alt":null,"id":32270250443071,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9351.jpg?v=1669181138"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9351.jpg?v=1669181138","width":3024},{"alt":null,"id":32270250475839,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9353.jpg?v=1669181138"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9353.jpg?v=1669181138","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e*Note this stem is larger than our XL and does not fit inside the FutoStash XL. Currently the compatible stash for this is our FutoStash Anvil XL.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL+ \u003cbr\u003e Length: 3.25\"\u003cbr\u003e Diameter: 0.600\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Custom DynaVap stem or mid section. *Note this stem is larger than our XL and does not fit inside the FutoStash XL. Currently the compatible stash for this is our FutoStash Anvil XL. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL+ Length: 3.25" Diameter: 0.600" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate...
Custom DynaVap stem or mid section. *Note this stem is larger than our XL and does not fit inside the...

-
{"id":8047612887359,"title":"Acrylic Camo XL Stem - #3829 - DynaVap Upgrade","handle":"acrylic-camo-xl-stem-3829-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-22T23:16:32-06:00","created_at":"2022-11-22T23:16:32-06:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":5000,"price_min":5000,"price_max":5000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44056212144447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Acrylic Camo XL Stem - #3829 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":5000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9307.jpg?v=1669180607","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9308.jpg?v=1669180607","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9309.jpg?v=1669180607"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9307.jpg?v=1669180607","options":["Title"],"media":[{"alt":null,"id":32270208500031,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9307.jpg?v=1669180607"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9307.jpg?v=1669180607","width":3024},{"alt":null,"id":32270208532799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9308.jpg?v=1669180607"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9308.jpg?v=1669180607","width":3024},{"alt":null,"id":32270208565567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9309.jpg?v=1669180607"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9309.jpg?v=1669180607","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$50.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8047610233151,"title":"Galaxy XL Stem - #3828 - DynaVap Upgrade","handle":"galaxy-xl-stem-3828-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-22T23:15:45-06:00","created_at":"2022-11-22T23:15:45-06:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44056203264319,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy XL Stem - #3828 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9303.jpg?v=1669180564","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9304.jpg?v=1669180565","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9305.jpg?v=1669180564"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9303.jpg?v=1669180564","options":["Title"],"media":[{"alt":null,"id":32270206107967,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9303.jpg?v=1669180564"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9303.jpg?v=1669180564","width":3024},{"alt":null,"id":32270206140735,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9304.jpg?v=1669180565"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9304.jpg?v=1669180565","width":3024},{"alt":null,"id":32270206173503,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9305.jpg?v=1669180564"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9305.jpg?v=1669180564","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e Length: 3.12\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$60.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8047556428095,"title":"Padauk Regular Stem - #3805 - DynaVap Upgrade","handle":"padauk-regular-stem-3805-dynavap-upgrade","description":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2022-11-22T22:43:06-06:00","created_at":"2022-11-22T22:43:06-06:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynastash","dynavap","dynavap dugout","dynavap stem","dynavape","simrell","vapcap"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44056109351231,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Padauk Regular Stem - #3805 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":4000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9193.jpg?v=1669178600","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9194.jpg?v=1669178600","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9195.jpg?v=1669178600"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9193.jpg?v=1669178600","options":["Title"],"media":[{"alt":null,"id":32270087225663,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9193.jpg?v=1669178600"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9193.jpg?v=1669178600","width":3024},{"alt":null,"id":32270087258431,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9194.jpg?v=1669178600"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9194.jpg?v=1669178600","width":3024},{"alt":null,"id":32270087291199,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9195.jpg?v=1669178600"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_9195.jpg?v=1669178600","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section.\u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003cbr\u003e\u003cbr\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer.\u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings.\u003c\/p\u003e\n\u003cp\u003eSize: Regular\u003cbr\u003e Length: 2.5\"\u003cbr\u003e Diameter: 0.520\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eInstructions: \u003cbr\u003e\u003cbr\u003e1. Pull out the \"tip\" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.\u003cbr\u003e\u003cbr\u003e2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. \u003cbr\u003e\u003cbr\u003e3. Press the tip into the ribbed end of your new mid section. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this is ok. \u003cbr\u003e\u003cbr\u003e4. If you have a model of DynaVap with a condenser, which is a replaceable tube extending from the draw end (the mouth piece end), you can also optionally use it. Push the condenser out from the inside and you'll see it's held in with flexible rings which easily compress. You can then push it into the smooth end of your new mid section until the last flexible ring is flush. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
$40.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: Regular Length: 2.5" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...

-
{"id":8034980102463,"title":"Futo Z Stem - Bur Oak","handle":"futo-z-stem-bur-oak","description":"\u003cp\u003eUpgrade your DyanVap M with a solid Oak Futo Z Stem\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Pairs with our FutoStash Z available in matching Oak\u003cbr\u003e- Compatible with all DynaVap Tips and Regular Condensers\u003cbr\u003e- Fits in our FutoStash Z and FutoStash R\u003cbr\u003e- Dimensions 2.5\" x 0.5\" \u003cbr\u003e- Fits 2.5\" Condensers\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces the mid section \/ stem of your DynaVap vaporizer.\u003cbr\u003eThe Tip and the condenser can pressed in to fit and is held in place with o-rings.\u003c\/p\u003e\n\u003cp\u003e* Vaporizer is not included.\u003c\/p\u003e","published_at":"2022-11-18T21:30:42-06:00","created_at":"2022-11-18T21:30:42-06:00","vendor":"Futo Manufacturing","type":"","tags":[],"price":2500,"price_min":2500,"price_max":2500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44033380745535,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Futo Z Stem - Bur Oak","public_title":null,"options":["Default Title"],"price":2500,"weight":100,"compare_at_price":null,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8954.jpg?v=1668829081","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8931.jpg?v=1668829095","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8929.jpg?v=1668829097","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8914.jpg?v=1668829120","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8915_3316c7a0-2bc1-49ff-9c46-2ce75cb01a7a.jpg?v=1668829120","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8916_c6300075-1797-458e-9fca-a839e51aa325.jpg?v=1668829119","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8908.jpg?v=1668829133","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8909.jpg?v=1668829132","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8910_3dc1c2f5-fb83-4ab6-87f1-b1b486db3fe5.jpg?v=1668829133"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8954.jpg?v=1668829081","options":["Title"],"media":[{"alt":null,"id":32232368079167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8954.jpg?v=1668829081"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8954.jpg?v=1668829081","width":3024},{"alt":null,"id":32232370143551,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8931.jpg?v=1668829095"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8931.jpg?v=1668829095","width":3024},{"alt":null,"id":32232370733375,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8929.jpg?v=1668829097"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8929.jpg?v=1668829097","width":3024},{"alt":null,"id":32232374108479,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8914.jpg?v=1668829120"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8914.jpg?v=1668829120","width":3024},{"alt":null,"id":32232374239551,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8915_3316c7a0-2bc1-49ff-9c46-2ce75cb01a7a.jpg?v=1668829120"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8915_3316c7a0-2bc1-49ff-9c46-2ce75cb01a7a.jpg?v=1668829120","width":3024},{"alt":null,"id":32232374337855,"position":6,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8916_c6300075-1797-458e-9fca-a839e51aa325.jpg?v=1668829119"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8916_c6300075-1797-458e-9fca-a839e51aa325.jpg?v=1668829119","width":3024},{"alt":null,"id":32232375910719,"position":7,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8908.jpg?v=1668829133"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8908.jpg?v=1668829133","width":3024},{"alt":null,"id":32232375943487,"position":8,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8909.jpg?v=1668829132"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8909.jpg?v=1668829132","width":3024},{"alt":null,"id":32232375976255,"position":9,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8910_3dc1c2f5-fb83-4ab6-87f1-b1b486db3fe5.jpg?v=1668829133"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8910_3dc1c2f5-fb83-4ab6-87f1-b1b486db3fe5.jpg?v=1668829133","width":3024}],"content":"\u003cp\u003eUpgrade your DyanVap M with a solid Oak Futo Z Stem\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Pairs with our FutoStash Z available in matching Oak\u003cbr\u003e- Compatible with all DynaVap Tips and Regular Condensers\u003cbr\u003e- Fits in our FutoStash Z and FutoStash R\u003cbr\u003e- Dimensions 2.5\" x 0.5\" \u003cbr\u003e- Fits 2.5\" Condensers\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces the mid section \/ stem of your DynaVap vaporizer.\u003cbr\u003eThe Tip and the condenser can pressed in to fit and is held in place with o-rings.\u003c\/p\u003e\n\u003cp\u003e* Vaporizer is not included.\u003c\/p\u003e"}
$25.00
Upgrade your DyanVap M with a solid Oak Futo Z Stem
- Pairs with our FutoStash Z available in matching Oak- Compatible with all DynaVap Tips and Regular Condensers- Fits in our FutoStash Z and FutoStash R- Dimensions 2.5" x 0.5" - Fits 2.5" Condensers
Replaces the mid section / stem of your DynaVap vaporizer.The Tip and the condenser can pressed in to fit and is held in place with o-rings.
* Vaporizer is not included.
Upgrade your DyanVap M with a solid Oak Futo Z Stem - Pairs with our FutoStash Z available in matching...

-
{"id":7535278653625,"title":"Angelim Pedra XL Stem - #3766 - DynaVap Upgrade","handle":"angelim-pedra-stem-3766-dynavap-upgrade-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section. \u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer. \u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings. \u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e\nLength: 3.125\"\u003cbr\u003e\nDiameter: 0.550\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n","published_at":"2022-10-27T09:21:42-05:00","created_at":"2022-10-27T09:21:42-05:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynavap","dynavap stem","simrell","vapcap"],"price":3500,"price_min":3500,"price_max":3500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42995704529081,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Angelim Pedra XL Stem - #3766 - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":3500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8506.jpg?v=1666880513","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8507.jpg?v=1666880513","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8508.jpg?v=1666880513"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8506.jpg?v=1666880513","options":["Title"],"media":[{"alt":null,"id":26374953074873,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8506.jpg?v=1666880513"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8506.jpg?v=1666880513","width":3024},{"alt":null,"id":26374953107641,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8507.jpg?v=1666880513"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8507.jpg?v=1666880513","width":3024},{"alt":null,"id":26374953140409,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8508.jpg?v=1666880513"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8508.jpg?v=1666880513","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section. \u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer. \u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings. \u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e\nLength: 3.125\"\u003cbr\u003e\nDiameter: 0.550\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n"}
$35.00
Custom DynaVap stem or mid section.
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XL
Length: 3.125"
Diameter: 0.550"
* vaporizer not included
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips. This is one of our special serial numbered...

-
{"id":7535269380281,"title":"Galaxy Burl XL Stem - #3759 - Stabilized Burl - DynaVap Upgrade","handle":"galaxy-burl-stem-3759-stabilized-burl-dynavap-upgrade-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section. \u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer. \u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings. \u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e\nLength: 3.125\"\u003cbr\u003e\nDiameter: 0.550\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n","published_at":"2022-10-27T09:13:28-05:00","created_at":"2022-10-27T09:13:29-05:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynavap","dynavap stem","simrell","vapcap"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42995687850169,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy Burl XL Stem - #3759 - Stabilized Burl - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8475.jpg?v=1666880020","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8476.jpg?v=1666880019","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8477.jpg?v=1666880019"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8475.jpg?v=1666880020","options":["Title"],"media":[{"alt":null,"id":26374921584825,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8475.jpg?v=1666880020"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8475.jpg?v=1666880020","width":3024},{"alt":null,"id":26374921617593,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8476.jpg?v=1666880019"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8476.jpg?v=1666880019","width":3024},{"alt":null,"id":26374921650361,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8477.jpg?v=1666880019"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_8477.jpg?v=1666880019","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section. \u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer. \u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings. \u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e\nLength: 3.125\"\u003cbr\u003e\nDiameter: 0.550\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n"}
$60.00
Custom DynaVap stem or mid section.
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XL
Length: 3.125"
Diameter: 0.550"
* vaporizer not included
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips. This is one of our special serial numbered...

-
{"id":7522559197369,"title":"Galaxy Burl XL Stem - #3719 - Stabilized Burl - DynaVap Upgrade","handle":"galaxy-burl-stem-3719-stabilized-burl-dynavap-upgrade-xl-size","description":"\u003cp\u003eCustom DynaVap stem or mid section. \u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer. \u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings. \u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e\nLength: 3.125\"\u003cbr\u003e\nDiameter: 0.550\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n","published_at":"2022-10-16T15:48:41-05:00","created_at":"2022-10-16T15:48:41-05:00","vendor":"Futo Manufacturing","type":"","tags":["420_30_PERCENT_OFF","420_GROUP_1","dynavap","dynavap stem","simrell","vapcap"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42938516078777,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy Burl XL Stem - #3719 - Stabilized Burl - DynaVap Upgrade","public_title":null,"options":["Default Title"],"price":8000,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_7995.jpg?v=1665953329","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_7996.jpg?v=1665953329"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_7995.jpg?v=1665953329","options":["Title"],"media":[{"alt":null,"id":26212292853945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_7995.jpg?v=1665953329"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_7995.jpg?v=1665953329","width":3024},{"alt":null,"id":26212292886713,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3024,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_7996.jpg?v=1665953329"},"aspect_ratio":1.0,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/IMG_7996.jpg?v=1665953329","width":3024}],"content":"\u003cp\u003eCustom DynaVap stem or mid section. \u003c\/p\u003e\n\u003cp\u003eCompatible with all DynaVap vaporizer Tips.\u003c\/p\u003e\n\u003cp\u003eThis is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.\u003c\/p\u003e\n\u003cp\u003eAll DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.\u003c\/p\u003e\n\u003cp\u003eThis is an upgrade piece to replace the main body of any DynaVap vaporizer. \u003c\/p\u003e\n\u003cp\u003eThe Tip can pressed in to fit and held with it's o-rings. \u003c\/p\u003e\n\u003cp\u003eSize: XL\u003cbr\u003e\nLength: 3.125\"\u003cbr\u003e\nDiameter: 0.550\"\u003c\/p\u003e\n\u003cp\u003e* vaporizer not included\u003c\/p\u003e\n"}
$80.00
Custom DynaVap stem or mid section.
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XL
Length: 3.125"
Diameter: 0.550"
* vaporizer not included
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips. This is one of our special serial numbered...
New Releases

-
{"id":8410734788927,"title":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","handle":"galaxy-burl-xl-futostash-3983-30716","description":"\u003cp\u003eFuto Galaxy Burl Stashes are out of this world stabilized burl wood with resin cast accents. The stabilization process hardens the burl wood and if dyes are added brings out amazing natural patters in the wood - some times they look cosmic in origin.\u003c\/p\u003e\n\u003cp\u003eWe've created a special numbered series in our FutoStash models, and each one is unique.\u003c\/p\u003e\n\u003cp\u003eFits all XL DynaVap models. (vaporizer sold separately)\u003c\/p\u003e\n\u003cp\u003eModel: FutoStash XL\u003cbr\u003e\nMaterial: Stabilized Boxelder Burl\u003c\/p\u003e\n\u003cp\u003eAs with all our products, these dugouts are hand-crafted from board-to-box in our own shop on the Canadian prairies. From sanding the lids so smooth that they are almost seamless, and fastening snug with a high thread-count screw, no detail has been spared. Our FutoStashes feature a genuine DynaMag, a perfectly spring loaded \"garage\" compartment, and a polished finish.\u003c\/p\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cp\u003e5.0\" tall\u003cbr\u003e\n2.0\" wide\u003cbr\u003e\n0.8\" thick\u003cbr\u003e\n \u003c\/p\u003e\n","published_at":"2023-05-30T10:51:25-05:00","created_at":"2023-05-30T10:51:25-05:00","vendor":"Futo Manufacturing","type":"","tags":["dugout","dugout one hitter","dynastash","dynavap","dynavap box","dynavap case","dynavap dugout","dynavape","one hitter","simrell","vapcap","vaporizer case","wood dugout"],"price":15500,"price_min":15500,"price_max":15500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45177292489023,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","public_title":null,"options":["Default Title"],"price":15500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940106_ixm2.jpg?v=1685461885","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940128_qose.jpg?v=1685461885","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.5003202021_p32g.jpg?v=1685461886","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940130_mkpm.jpg?v=1685461886","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940100_2bpm.jpg?v=1685461886","\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.5003201973_qlqr.jpg?v=1685461886"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940106_ixm2.jpg?v=1685461885","options":["Title"],"media":[{"alt":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","id":33934823293247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":3000,"width":3000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940106_ixm2.jpg?v=1685461885"},"aspect_ratio":1.0,"height":3000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940106_ixm2.jpg?v=1685461885","width":3000},{"alt":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","id":33934823326015,"position":2,"preview_image":{"aspect_ratio":1.0,"height":3000,"width":3000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940128_qose.jpg?v=1685461885"},"aspect_ratio":1.0,"height":3000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940128_qose.jpg?v=1685461885","width":3000},{"alt":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","id":33934823358783,"position":3,"preview_image":{"aspect_ratio":1.0,"height":3000,"width":3000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.5003202021_p32g.jpg?v=1685461886"},"aspect_ratio":1.0,"height":3000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.5003202021_p32g.jpg?v=1685461886","width":3000},{"alt":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","id":33934823391551,"position":4,"preview_image":{"aspect_ratio":1.0,"height":3000,"width":3000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940130_mkpm.jpg?v=1685461886"},"aspect_ratio":1.0,"height":3000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940130_mkpm.jpg?v=1685461886","width":3000},{"alt":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","id":33934823424319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":3000,"width":3000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940100_2bpm.jpg?v=1685461886"},"aspect_ratio":1.0,"height":3000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.4954940100_2bpm.jpg?v=1685461886","width":3000},{"alt":"Galaxy Burl XL FutoStash #3983 - Stabilized Boxelder Burl - DynaVap Stash - Wormy Burl Wood","id":33934823457087,"position":6,"preview_image":{"aspect_ratio":1.0,"height":3000,"width":3000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.5003201973_qlqr.jpg?v=1685461886"},"aspect_ratio":1.0,"height":3000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1951\/4735\/products\/il_fullxfull.5003201973_qlqr.jpg?v=1685461886","width":3000}],"content":"\u003cp\u003eFuto Galaxy Burl Stashes are out of this world stabilized burl wood with resin cast accents. The stabilization process hardens the burl wood and if dyes are added brings out amazing natural patters in the wood - some times they look cosmic in origin.\u003c\/p\u003e\n\u003cp\u003eWe've created a special numbered series in our FutoStash models, and each one is unique.\u003c\/p\u003e\n\u003cp\u003eFits all XL DynaVap models. (vaporizer sold separately)\u003c\/p\u003e\n\u003cp\u003eModel: FutoStash XL\u003cbr\u003e\nMaterial: Stabilized Boxelder Burl\u003c\/p\u003e\n\u003cp\u003eAs with all our products, these dugouts are hand-crafted from board-to-box in our own shop on the Canadian prairies. From sanding the lids so smooth that they are almost seamless, and fastening snug with a high thread-count screw, no detail has been spared. Our FutoStashes feature a genuine DynaMag, a perfectly spring loaded \"garage\" compartment, and a polished finish.\u003c\/p\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cp\u003e5.0\" tall\u003cbr\u003e\n2.0\" wide\u003cbr\u003e\n0.8\" thick\u003cbr\u003e\n \u003c\/p\u003e\n"}
$155.00
Futo Galaxy Burl Stashes are out of this world stabilized burl wood with resin cast accents. The stabilization process hardens the burl wood and if dyes are added brings out amazing natural patters in the wood - some times they look cosmic in origin.
We've created a special numbered series in our FutoStash models, and each one is unique.
Fits all XL DynaVap models. (vaporizer sold separately)
Model: FutoStash XL
Material: Stabilized Boxelder Burl
As with all our products, these dugouts are hand-crafted from board-to-box in our own shop on the Canadian prairies. From sanding the lids so smooth that they are almost seamless, and fastening snug with a high thread-count screw, no detail has been spared. Our FutoStashes feature a genuine DynaMag, a perfectly spring loaded "garage" compartment, and a polished finish.
Dimensions
5.0" tall
2.0" wide
0.8" thick
Futo Galaxy Burl Stashes are out of this world stabilized burl wood with resin cast accents. The stabilization process hardens...