Special edition DynaVap PipeMaterials - briar with vulcanite stemDesign for use with any DynaVap tip (5/16")  Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. 3. Press the tip into the end of your pipe. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this...

Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: Regular / Wide (*May require a custom stash, ask for details) Length: 2.5-3.0" Diameter: 0.600" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied...