All Products

Showing 1 - 839 of 839 results
FutoStash S - Canarywood
$30.00
FutoStash S - is our super thin profile FutoStash.  Made to store all DynaVap "M" Series vaporizers. The thin profile and gently rounded corners of the FutoStash S are enjoyable to handle and easily fit in your pocket. It's spring loaded for easy removal. The box is set with a DynaMag - a specially made rare earth magnet used to set down the vaporizer when the cap is hot, or to remove the cap hands free.    As with all our products, these dugouts are hand-crafted from board-to-box in our own shop on the Canadian prairies. From sanding the lids so smooth that they are almost seamless, and fastening snug with a high thread-count screw, no detail has been spared. Our FutoStashes feature a genuine DynaMag, a perfectly spring loaded "garage" compartment, and a polished finish. Dimensions 4.4" tall1.9" wide0.7" thick ** Vaporizer are sold separately *
FutoStash S - is our super thin profile FutoStash.  Made to store all DynaVap "M" Series vaporizers. The thin profile and...
Spring Kit - Fits All FutoStash Models or Add a Spring to Your DynaStash
Sold Out
We have a custom made spring that fits perfectly into all Futo stash models also other popular brands like DynaStash. We'll send you a 3 pack of springs. Order these as an add-on item to keep your shipping cost down, we send them in a bubble mailer envelope so the shipping is just 1.00 when you add them onto your order. How to install: 1. If you have a spring in your stash already, remove it by just pulling it out. The springs are always just friction fit into the stash. This can be done with any long thin improvised device, such as a paper clip with a little hook on the end. 2. Orient your spring with widest coil at the bottom. The bottom coil should be just slightly wider than the hole. 3. Press the spring into the hole, this should require you to squish it a bit....
We have a custom made spring that fits perfectly into all Futo stash models also other popular brands like DynaStash....
VapeStation - Walnut
$60.00
Futo VapeStations are the ideal session / travel case for your vape accessories.   Fits all of our popular stashes including all regular and XL sized FutoStashes.  The DynaVap Cradle fits all regular and XL sizes of DynaVaps, as well as some after larger market sizes.  Features a genuine DynaMags, and a DynaVap Mouth Piece Stand to set your DynaVap on end for hands free loading.  The VapeStation lid is held with powerful rare earth magnets.  Have your next session in style with a VapeStation! Includes compartment base & tray style lid. *Accessories sold separately
Futo VapeStations are the ideal session / travel case for your vape accessories.   Fits all of our popular stashes including all...
Aomai Slim Torch Lighter
$7.00
Aomai Slim Torch Lighter*: Recommended for speedy heating, torch lighters are the perfect companion piece to any Dynavap device or glass hitter. This sleek single-flame version is a stylish and versatile option.
Aomai Slim Torch Lighter*: Recommended for speedy heating, torch lighters are the perfect companion piece to any Dynavap device or glass...
Futo Magnet Stand - Walnut - Holds x4 Vaporizers - DynaVap Stand - Desktop Magnetic Display Stand
$25.00
Futo Magnet Stands are a solid wood desk top stand made with 4 custom rare earth magnets, 0.5" diameter. Holds 4 DynaVap vaporizers, or get creative and use it for other metal accessories. They're a perfect way to store your pieces upright and keep them from rolling around. Choose a wood that matches your decor, or your stash and other smoking or vaping accessories - Hold 4 items - Magnets are 0.5" (12mm) diameter - Stand is 6" wide x 2" deep x 0.9" tall Made on our cnc machines in the Futo shop (yup we actually cut the magnet holes with a cnc, they're super exact). Stands are finely hand sanded and finished with walnut oil. More products available on our website http://www.futo.ca Follow us on Instagram for more photos @futodugouts
Futo Magnet Stands are a solid wood desk top stand made with 4 custom rare earth magnets, 0.5" diameter. Holds 4...
Futo Walnut Grinder
$30.00
Futo Grinders are unique because we CNC machine them solid exotic wood - the teeth are strong because we use thick slabs of the right exotics with the grain running in the direction of the teeth, so they're not just attached or pinned in like the cheap imports - they're carved from one solid piece. We use a thick diamond shaped tooth layout that gets excellent reviews.. Our original 2 piece grinders are held together with strong rare earth magnets. The wood does well to resist sticky build up, it's finished with an all natural food safe organic beeswax and oil wood finish. No aluminum dust from wear and grinding, no tight metal connections that can clog, a simple functional design made from all natural wood. ~DIMENSIONS~ 1.5” tall 2.5” wide
Futo Grinders are unique because we CNC machine them solid exotic wood - the teeth are strong because we use...
FutoStash S - Walnut
$30.00
FutoStash S - is our super thin profile FutoStash.  Made to store all DynaVap "M" Series vaporizers. The thin profile and gently rounded corners of the FutoStash S are enjoyable to handle and easily fit in your pocket. It's spring loaded for easy removal. The box is set with a DynaMag - a specially made rare earth magnet used to set down the vaporizer when the cap is hot, or to remove the cap hands free.    As with all our products, these dugouts are hand-crafted from board-to-box in our own shop on the Canadian prairies. From sanding the lids so smooth that they are almost seamless, and fastening snug with a high thread-count screw, no detail has been spared. Our FutoStashes feature a genuine DynaMag, a perfectly spring loaded "garage" compartment, and a polished finish. Dimensions 4.4" tall1.9" wide0.7" thick ** Vaporizer are sold separately *
FutoStash S - is our super thin profile FutoStash.  Made to store all DynaVap "M" Series vaporizers. The thin profile...
Clear Glass - 8mm Hitter
$4.00
Custom made Futo 8mm shortie glass one hitter, borosilicate glass. Our smallest sized one hitter available. Fits in our Sprouts, Model M, Model X and FutoStash X. You should get one to store your one hitter, it's a pocket sized box with a spring loaded compartment for the hitter and also holds a gram of herb. Dugouts and one hitters were made to go together! Shipping is free when added onto a stash order! Available in 2 styles: Bevelled edge - improves digging for use in a dugout/stash. We cold grind a small bevel onto the tip of the bowl to make it work well when pressed into some herb, you can just push and twist to load the bowl. We highly recommend this style for use in one of our stashes. Natural edge - glossy and rounded the way it came off the torch, flame polished edge. If you're...
Custom made Futo 8mm shortie glass one hitter, borosilicate glass. Our smallest sized one hitter available. Fits in our Sprouts,...
FutoStash XL - Live Edge Oak
$45.00
FutoStash - Live Edge Oak - Storage Box for DynaVap - Premium Accessory for DynaVap To purchase a DynaVap vaporizer with this FutoStash, check out our DynaVap section. Made from select cuts of live edge oak, locally and sustainably harvested near our shop in Canada. We bring the logs into to the shop and custom mill by hand into the rough boards, where they season for at least one year before they can be crafted into the select cuts for our signature "Live" Edge FutoStashes. FutoStash is a premium storage box made to store your DynaVap. Engineered with specific internal dimensions to store all DynaVap models. The FutoStash features: Custom fit garage compartment to store your DynaVap Large storage stash Genuine DynaMag - a strong rare earth magnet with the correct polarization and strength to hold onto and remove the heated cap of your DynaVap, or to leave it standing at attention. Dimensions: 5" tall~2.5" wide0.8" thick
FutoStash - Live Edge Oak - Storage Box for DynaVap - Premium Accessory for DynaVap To purchase a DynaVap vaporizer with this FutoStash,...
Clear - 12mm Glass Hitter
$5.00
Custom made Futo 12mm glass one hitter, borosilicate glass with a thick wall. Our largest one hitter with the largest bowl, they're more like a three hitter. Fits in all of our FutoStash G and GX stashes. You should get a FutoStash to store your one hitter, it's a pocket sized box with a spring loaded compartment for the hitter and also holds a couple grams of herb. Stashes and one hitters were made to go together! Shipping is free when added onto a stash order! Available in 2 styles: Bevelled edge - improves digging for use in a dugout/stash. We cold grind a small bevel onto the tip of the bowl to make it work well when pressed into some herb, you can just push and twist to load the bowl. We highly recommend this style for use in one of our stashes. Natural edge - glossy and rounded...
Custom made Futo 12mm glass one hitter, borosilicate glass with a thick wall. Our largest one hitter with the largest...
Walnut Rolling Tray XL
$45.00
Futo XL Trays are designed as a session space, for both smoke and vape sessions.  The curved main area gives you the perfect amount of space for working and also stores a 2.5" grinder.  The unique open corner design allows for easy cleanup to easily empty your tray back into a container or to fill your stash.  Dimensions: 12” wide6" deep0.9” tall
Futo XL Trays are designed as a session space, for both smoke and vape sessions.  The curved main area gives you the perfect amount of space for working and also...
x4  Bowl Stand - 14mm - Walnut
$20.00
Futo Bowl Stands are a solid wood desk top stand made to hold smoking and vaping accessories with the common 14m tapered end. 14mm glass bowls, DynaVap VonG models, and other popular brands made to fit the standard 14mm fitting. They're a perfect way to store your bowl collection and accessories upright and keep them from rolling around. Choose a wood that matches your decor, or your stash and other smoking or vaping accessories - Hold 4 items - Fits 14mm tapered fittings, which is the diameter about mid way up the tapered end - Holes are 0.54" (13.7mm) diameter and 0.80" (20mm) deep. - Stand is 6" wide x 2" deep x 0.9" tall Made on our cnc machines in the Futo shop, finely hand sanded and finished with walnut oil. More products available on our website http://www.futo.ca Follow us on Instagram for more photos @futodugouts
Futo Bowl Stands are a solid wood desk top stand made to hold smoking and vaping accessories with the common 14m...