
062623 Release
$165.00
Futo Galaxy Burl Stashes are out of this world stabilized burl wood with resin cast accents. The stabilization process hardens the burl wood and if dyes are added brings out amazing natural patters in the wood - some times they look cosmic in origin.
We've created a special numbered set in our FutoStash models, and each one is unique.
Fits all Regular size DynaVap models. (vaporizer sold separately)
Model: FutoStash R
Material: Stabilized Boxelder Burl
As with all our products, these dugouts are hand-crafted from board-to-box in our own shop on the Canadian prairies. From sanding the lids so smooth that they are almost seamless, and fastening snug with a high thread-count screw, no detail has been spared. Our FutoStashes feature a genuine DynaMag, a perfectly spring loaded "garage" compartment, and a polished finish.
Dimensions
4.3" tall
2.0" wide
0.8" thick
Follow us on instagram @futodugouts for more photos
Futo Galaxy Burl Stashes are out of this world stabilized burl wood with resin cast accents. The stabilization process hardens...
$120.00
$150.00
Special edition DynaVap PipeMaterials - briar with vulcanite stemDesign for use with any DynaVap tip (5/16") Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. 3. Press the tip into the end of your pipe. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this...
Special edition DynaVap PipeMaterials - briar with vulcanite stemDesign for use with any DynaVap tip (5/16") Instructions: 1. Pull out the...
$120.00
$150.00
Special edition DynaVap PipeMaterials - briar with vulcanite stemDesign for use with any DynaVap tip (5/16") Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil or food safe oil like walnut oil is also ok, or any salad bowl wood finish - which means it's food safe and usually just a mix of mineral oil and beeswax. 3. Press the tip into the end of your pipe. It's a firm fit, and with a little pressure and twisting it will seat fully. On some tips when fully seated the last o-ring will still be visible, this...
Special edition DynaVap PipeMaterials - briar with vulcanite stemDesign for use with any DynaVap tip (5/16") Instructions: 1. Pull out the...
$65.00
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos. All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one. This is an upgrade piece to replace the main body of any DynaVap vaporizer. The Tip can pressed in to fit and held with it's o-rings. Size: XL Length: 3.12" Diameter: 0.520" * vaporizer not included Instructions: 1. Pull out the "tip" from your DynaVap. It's held in with 2-3 o-rings and should easily pull out. This is the same procedure that should be done from time to time for cleaning.2. Clean and lubricate the o-rings. This step is important, we recommend using some of the wax that's supplied with your DynaVap on the o-rings. A bit of mineral oil...
Custom DynaVap stem or mid section. Compatible with all DynaVap vaporizer Tips.This is one of our special serial numbered listings,...
$85.00
Custom DynaVap stem or mid section.
* XXL Stems are 1.0" longer than XL and slightly wider. * For storage they will fit inside our FutoStash XXL
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XXL Length: 4.125" Diameter: 0.600"
* vaporizer not included
Custom DynaVap stem or mid section. * XXL Stems are 1.0" longer than XL and slightly wider. * For storage they...
$85.00
Custom DynaVap stem or mid section.
* XXL Stems are 1.0" longer than XL and slightly wider. * For storage they will fit inside our FutoStash XXL
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XXL Length: 4.125" Diameter: 0.600"
* vaporizer not included
Custom DynaVap stem or mid section. * XXL Stems are 1.0" longer than XL and slightly wider. * For storage they...
$85.00
Custom DynaVap stem or mid section.
* XXL Stems are 1.0" longer than XL and slightly wider. * For storage they will fit inside our FutoStash XXL
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XXL Length: 4.125" Diameter: 0.600"
* vaporizer not included
Custom DynaVap stem or mid section. * XXL Stems are 1.0" longer than XL and slightly wider. * For storage they...
$85.00
Custom DynaVap stem or mid section.
* XXL Stems are 1.0" longer than XL and slightly wider. * For storage they will fit inside our FutoStash XXL
Compatible with all DynaVap vaporizer Tips.
This is one of our special serial numbered listings, only one is available. You'll get the exact piece shown in the photos.
All DynaVap components are removable for easy cleaning, and also to accessorize with cool upgrades like this one.
This is an upgrade piece to replace the main body of any DynaVap vaporizer.
The Tip can pressed in to fit and held with it's o-rings.
Size: XXL Length: 4.125" Diameter: 0.600"
* vaporizer not included
Custom DynaVap stem or mid section. * XXL Stems are 1.0" longer than XL and slightly wider. * For storage they...
$75.00
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the photos
Metal linedSpring loadedThreaded End Cap for secure storageCarabiner ClipSize: 1 x 6"
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the...
$75.00
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the photos
Metal linedSpring loadedThreaded End Cap for secure storageCarabiner ClipSize: 1 x 6"
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the...
$75.00
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the photos
Metal linedSpring loadedThreaded End Cap for secure storageCarabiner ClipSize: 1 x 6"
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the...
$75.00
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the photos
Metal linedSpring loadedThreaded End Cap for secure storageCarabiner ClipSize: 1 x 6"
Storage tube for your DynaVap Omni or M Series vaporizers.*Special serial numbered listing for the exact piece shown in the...